Function: heat and melt steel in the presence of pressurized oxygen
A Thermal Lance, thermic lance, oxygen lance, or burning bar is a tool that heats and melts steel in the presence of pressurized oxygen to create the very high temperatures (≥3600°C) required for cutting. It consists of a long steel tube packed with alloy steel rods, sometimes mixed with aluminium rods to increase the heat output. One end of the tube is placed in a holder and oxygen is fed through the tube.
The far end of the tube is pre-heated and lit by an oxyacetylene torch. An intense stream of burning steel is produced at the workpiece end and can be used to cut rapidly through thick materials including steel and concrete.The tube is consumed, so every few minutes the oper- ator shuts off the oxygen, discards the remaining stub of a lance tube and starts using a new one.
Although often used as a heavy duty demolition tool, the thermic lance can also be used to remove seized axles of heavy machinery without damaging the bearings or axle housing. This technique is most often used on the pins and axles of large equipment such as cranes,ships, bridges and sluice-gates.
It is used in steel-making for boring of concrete structure,remove burned sand,cutting stain-less steel and nonferrous metal.cutting riser in ductile cast iron,cutting sheet or pipe pile and some other special steel,cutting pig iron mixed with slag,cutting blast furnace shell,cutting&- boring furnace bottom refractory brick.
Technical Information of thermal lance:
|
N o m i n a l S i z e
|
O D ( m m )
|
WT(mm)
|
L(M)
|
Bundle
|
|
6A(1/8")
|
10
|
1
|
1.8 /3 / 5
|
500
|
|
8 A(1/4")
|
13.7
|
1.5
|
1. 8 /3 /5
|
400
|
|
10 A(3/8")
|
17.1
|
2
|
1.8 /3 /5
|
300
|
|
1SA(1/2")
|
21.3
|
2
|
2.75/3.2/5
|
200
|
|
20 A(3/4")
|
26.7
|
2.5
|
2.75 /3. 2/5
|
100
|
Packaging of Thermal Lance:
Wuxi Gotele Metalare packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
1)SMC Standard
2)Customization
More of thermal lance:
Burn open large, bottom pouring smelting furnaces
Remove carbon during the smelting process of various metals
Lower oxygen and lance consumptions
Full length burning, thanks to its exclusive coupling system
Focused on the attack point resulting in more accurate cuts
Faster operations decreased operator’s exposure time
Less fumes and sparks are generated, easier to operate
